8-24 Chapter 8Using the Memory FeaturesSET 3. Press SET.SUBADDRESS1472580369ABCGHIPQRSJKLTUVMNOWXYZDEF SET 4. Use the buttons on the numeric keypad to enter the ITU-T subaddress of thememory box holding the document you want to print. Then press SET.MEMORY BOX RXPASSWORDIf you have not set the operation password, the documents starts printing.1472580369ABCGHIPQRSJKLTUVMNOWXYZDEF SET 5. Enter the four-digit operation password that protects the memory box setupand press SET.After you enter the operation password, the document starts printing.MEMORY BOX RXPRINTING P.001/001What Happens to Memory after a PowerFailureIf power to the fax is lost due to a power failure, or if the fax is accidentallyunplugged, a built-in battery keeps a trickle of current supplied to the memory soall the documents currently stored in the memory can be saved for up toapproximately 12 hours.How Your Registered Data Is ProtectedThis is what happens when the fax is disconnected:J The backup battery takes over and keeps a trickle of current flowing to thememory in order to preserve all the documents in the memory waiting to besent or printed.J However, if the fax is left off for longer than approximately 12 hours, alldocuments in the fax memory will be lost after the battery runs down, and assoon as power is restored to the fax a Memory Clear List is printed thatshows you what documents were erased. (Q14-15)
