6-25Chapter 6 Sending Documents-or-Press DIRECTORY and search for the name to dial a number registered forsubaddress/password sending. (Q4-31)4. Press START/SCAN.TRANSMITTING 0010SCANNING DOC. P.001Subaddress/Password Sending with the Operation PanelButtonsNote these limitations on entering the subaddress/password with theSUBADDRESS and PASSWORD buttons on the operation panel:J If you frequently need to use a subaddress/password to send a document tomore than one location, register the number, subaddress, and password for aOne-touch or Coded Speed Dialling button so you can use multiplebroadcasting. (Q6-20)J You can not use a One-touch or Coded Speed Dialling button for which TXTYPE is set for anything other than REGULAR TX. (Q4-6, 4-14)J The password setting is optional but required if the other party has set apassword on the other fax unit.Follow this procedure to send a document with a subaddress/password enteredwith the SUBADDRESS and PASSWORD buttons on the operation panel.1. Set the document on the fax. (Q6-3)Set the document resolution, contrast, and document type. (Q6-4)You can also select a sender’s name with the TTI SELECTOR. (Q6-6)1472580369ABCGHIPQRSJKLTUVMNOWXYZDEF 2. Dial the telephone number.Use the buttons on the numeric keypad to enter the telephone number, oruse the speed dialling buttons to dial.To dial with One-touch Speed dialling, press the One-touch Speed Diallingbutton where the number is registered.To dial with a Coded Speed Dialling, press CODED DIAL and then use thenumeric keypad to enter the three-digit dialling code.
