2-28 Chapter 2Setting UpThe unit has warmed up and is ready to use when you see the date and timedisplay.26/12 ’97 FRI 12:20When the date is displayed on the LCD, the fax is in the standby mode and readyfor normal operation. If the alarm starts blinking red, wait for one of thefollowing messages to appear.REPLACE CARTRIDGE The toner cartridge has run out of toner.Replace the toner cartridge.CHECK PRINTER COVER The printer cover is not closed completely. If itdoes not close easily, do not force it. Remove thetoner cartridge, and insert it again. Make sure itis sitting level inside the fax machine then closethe printer cover again. And make sure the tonercartridge is installed in the fax unit.SUPPLY REC. PAPER One of the paper cassettes is empty or one of thepaper cassettes is not seated correctly inside thefax machine. Remove each cassette. Make surethe stack of paper is below the tabs and insertthe paper cassette again. Push the papercassettes all the way in until they lock in place.When ENERGY SAVER is ON, the fax switches to the energy save mode in aspecified length of time (Q3-19, 16-26). The ENERGY SAVER indicator lightsred and ENERGY SAVER appears in the LCD display.ENERGY SAVERENERGY SAVER To restore to the standby mode, press the ENERGY SAVER button.
