G-7GlossaryMemory sendingScanning the document into the memory before the facsimile dials the numberand sends it. Scanning is fast and you only have to wait until the originaldocument is scanned, not until it is sent. You can get the original back muchfaster and spend less time standing around the fax.MultitransactionAlso called, multiple transmission or sequential broadcast, this term refers toscanning a document once and sending it to more than one location. You cansend a single document to a maximum of 210 destinations.NNoiseA general term applied to a number of problems that adversely affect theoperation of telephone lines used for modem and fax communication.Normal modeUsing the fax with its default settings.Numeric buttonsThe numeric buttons are the round buttons on the operation panel marked thesame as a standard telephone keypad. Press to perform regular dialling. Thenumeric buttons are also used to enter numbers and letters when registeringnumbers and names.OOne-touch Speed DiallingEach One-touch Speed Dialling button holds a facsimile telephone number.After the numbers are registered, all you have to do is press one button to dial.Up to 72 numbers can be registered for One-touch Speed Dialling.PPAUSEBy pressing PAUSE, you can enter a pause between digits of a telephone numberwhen you register the number for One-touch or Coded Speed Dialling or duringregular dialling. A pause may be required for a connection to an outside line, orsome countries may require a pause for overseas fax transmission.
