7-14 Chapter 7Receiving DocumentsTransfer Setup Summary (Cont’d)5.TIME SETUP* Sets the time to move the fax into and out of the transfer mode. Ifyou do not set the timer, you can still switch the fax into thetransfer mode manually.1.START TIME Set a time to move the fax automatically into the transfer mode.EVERY DAY : Sets the fax to move into the transfer modeevery day. You can set up to 5 starting timesfor every day of the week.SELECT DAYS 1.SUN to 7.SAT Sets the fax to move into the transfer modeonly on selected days of the week.: You can set up to 5 starting times for theselected days.2.END TIME Sets the time for the fax to leave the transfer mode and return tothe normal mode.EVERY DAY : Sets the fax to move out of the transfer modeevery day. You can set up to 5 end times forevery day of the week.SELECT DAYS 1.SUN to 7.SAT Sets the fax to move out of the transfer mode: on selected days of the week. You can set upto 5 end times for the selected days.6.PRINT RX DOC. Sets the fax to print a copy of the transferred document at thetransfer unit.OFF Received and transferred documents are notprinted at the transfer unit.ON A copy of every document received andtransferred is printed at the transfer unit.# OF RX COPIES To enter the number of copies (01-99) use thenumeric keypad to enter the number or pressthe search buttons to increase or decrease thenumber and press SET.* The following settings are valid: You can set EVERY DAY for the start time and then use SELECT DAYS to set end times.You can also set SELECT DAYS for start times and then use the EVERY DAY setting for the end time. However, you cannot set both EVERY DAY and SELECT DAYS for the start time or end time.
