Fit Paper SizeEnlarge or reduce the original to match the size of the paper you are using.Note• The printer driver automatically enlarges originals 3 mm (0.12 in) past the dimensions of the paper oneach side. The 3 mm portion beyond the edge on each side is not printed.For instructions on borderless printing of photos, images, and other documents to match the paper size, refer to the fol-lowing topics, as appropriate for your computer and operating system.• Borderless Printing by Resizing Originals to Match the Paper Size (Windows) →P.92• Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X) →P.94Borderless Printing by Resizing Originals to Match the Paper Size (Windows)This topic describes how to enlarge originals before borderless printing to match the paper size, based on the followingexample.• Document: Any type• Page size: 10×12 inches (254.0×304.8 mm)• Paper: Roll• Paper type: Heavyweight Coated Paper• Roll paper width: 10 inches (254.0 mm)1. In the application, create an original that takes up the entire space of the paper size.Note• If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions onspecifying the margin, refer to the software documentation.2. Choose Print in the application menu.3. Select the printer in the dialog box, and then display the printer driver dialog box.(See "Accessing the PrinterDriver Dialog Box from Applications (Windows) →P.195 ")Enhanced Printing Options > Borderless Printing >Borderless Printing by Resizing Originals to Match the Paper Size (Windows) iPF755392
