Paper MenuSetting Item Description, InstructionsLoad Paper Select sheets or rolls and load the paper.Eject Paper Choose this item before removing loaded paper.Chg. Paper Type (*1 →P.669 ) Change the type of paper loaded. (See "Changing theType of Paper.") →P.592Chg. Paper Size Change the size of paper loaded. (See "Specifying thePaper Length.") →P.594 (See "Paper Sizes.")→P.582ManageRemainRoll Choose On to print a barcode at the end of a roll beforeyou remove it. The printed barcode can be used in manag-ing the amount of roll paper left. Choose Off if you prefernot to print the barcode.(See "Keeping Track of the Amount of Roll PaperLeft.") →P.599Paper Details (The type ofpaper is dis-played here.)(*1→P.669 )Head Height Adjust the Printhead height. (See "Troubleshooting Pa-per Abrasion and Blurry Images (Head Height).")→P.626Skew CheckLv.If you print on Japanese paper (washi) or other handmadepaper that has an irregular width, choose Loose for a high-er skew detection threshold, or choose Off to disable skewdetection. However, if paper is loaded askew when detec-tion is Off, note that paper jams or Platen soiling may oc-cur.Cutting Mode Specify whether or not to cut with the standard round-bla-ded cutter.Choose Automatic to have the roll cut automatically afterprinting. If you choose Manual, the paper will not be cutafter printing. Instead, a line will be printed at the cut posi-tion.Choose Eject if you prefer not to have documents droppedimmediately after printing, as when waiting for ink to dry.Cut Speed Choose the cutting speed. If you use adhesive paper,choosing Slow helps prevent adhesive from sticking to thecutter and keeps the cutter sharp.Trim EdgeFirstIf a roll is loaded, the end of the paper will be cut.CutDustRe-duct.If you choose On, a line will be printed at the cut positionwhen paper cutting is selected. This option reduces theamount of debris given off after cutting. It also helps pre-vent adhesive from sticking to the cutter and keeps the cut-ter sharp if you use adhesive paper. (See "Reducing Dustfrom Cutting Rolls.") →P.607Vac-uumStrngthSpecify the level of suction that holds paper against thePlaten. (See "Adjusting the Vacuum Strength (Vac-uumStrngth).") →P.635Printer Parts > Control Panel >Menu Settings iPF7559668
