Note• If the Tab Selection screen is not displayed, press the Menu button.2. Press the OK button.The Paper Menu is displayed.3. Press ▲ or ▼ to select Chg. Paper Type, and then press the OK button.4. Press ▲ or ▼ to select the type of paper loaded ( Roll Paper or Cut Sheet ), and then press the OK button.5. Press ▲ or ▼ to select the type of paper loaded in the printer, and then press the OK button.Note• For details on types of paper, see the Paper Reference Guide. (See "Types of Paper.") →P.579By default, Plain Paper is selected.• If you move the Release Lever, the setting automatically reverts to the previously selected paper.• Be sure to select the correct paper type. If this setting does not match the loaded paper, it maycause feed errors and affect printing quality.Using the Same Type of Paper RegularlyConfigure this setting so that current media type settings will be automatically selected when you load the same type ofpaper later.1. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.2. Press the OK button.The Paper Menu is displayed.3. Press ▲ or ▼ to select Keep Paper Type, and then press the OK button.4. Press ▲ or ▼ to select On, and then press the OK button.Note• The specified media type setting is updated in the following situations.• When using sheets, if you send a print job before loading a sheet, the media type setting is updated tomatch the type of paper specified by the print job.• When you have selected ManageRemainRoll > On on the Control Panel and a barcode is printed onthe roll, the media type setting is updated to match the type of paper specified by the barcode.• To change the media type setting, see "Changing the Type of Paper." →P.592Handling Paper > Handling rolls >iPF755 Changing the Type of Paper7593
