Cause Corrective ActionDensity may be uneven if you useGlossy Paper or Coated Paper.In Advanced Settings of the printer driver, choose Highest or High in PrintQuality.The type of paper specified in theprinter driver does not match thetype loaded in the printer.Load paper of the same type as you have specified in the printer driver.(See "Loading Rolls in the Printer.") →P.588(See "Loading Sheets in the Printer.") →P.609Make sure the same type of paper is specified in the printer driver as youhave loaded in the printer.1. Press the Stop button and stop printing.2. Change the type of paper in the printer driver and try printing again.Scan Wait Time > Area in theControl Panel menu is set to Lead-ing edge.When Scan Wait Time > Area is set to Leading edge, colors may be un-even 110–140 mm from the leading edge. (The position varies depending onthe Print Quality setting.)In this case, select Scan Wait Time > Area > Entire area.However, note that printing will now take longer.(See "Menu Settings.") →P.667Image edges are blurred or white banding occursCause Corrective ActionThe Platen suction is too strong. In the Control Panel menu, set VacuumStrngth to Weakest.(See "Adjusting the Vacuum Strength (VacuumStrngth).") →P.635The Printhead is set too high in theControl Panel menu.In the Control Panel menu, set Head Height to Lowest.(See "Troubleshooting Paper Abrasion and Blurry Images (HeadHeight).") →P.626The type of paper specified in theprinter driver does not match thetype loaded in the printer.Load paper of the same type as you have specified in the printer driver.(See "Loading Rolls in the Printer.") →P.588(See "Loading Sheets in the Printer.") →P.609Make sure the same type of paper is specified in the printer driver as youhave loaded in the printer.1. Press the Stop button and stop printing.2. Change the type of paper in the printer driver and try printing again.The contrast becomes uneven during printingCause Corrective ActionThe paper feed amount is out of adjust-ment.Adjust the feed amount.(See "Adjusting the Feed Amount.") →P.628The type of paper specified in the printerdriver does not match the type loaded inthe printer.Load paper of the same type as you have specified in the printer driver.(See "Loading Rolls in the Printer.") →P.588(See "Loading Sheets in the Printer.") →P.609Make sure the same type of paper is specified in the printer driver asyou have loaded in the printer.1. Press the Stop button and stop printing.2. Change the type of paper in the printer driver and try printing again.Troubleshooting > Problems with the printing quality >iPF755 Image edges are blurred or white banding occurs12787
