Setting Item Description, InstructionsSys-temSetupTrimEdge Reload Specify On to have rolls cut when printing beginsafter Sleep mode or when the power is restored. Se-lecting Automatic will trim the edge when the rollhas been in the retracted position for two days ormore.Rep.P.head Print Choose On to have the printer automatically exe-cute the Advanced Adj. operations after you re-place the Printhead. (See "Automatic Adjustmentto Straighten Lines and Colors (Head Posi.Adj.).") →P.620Nozzle Check In Frequency, specify the timing for automaticchecks of nozzle clogging. Choose Standard tohave the printer adjust the timing for checks basedon the frequency of nozzle use. Choose 1 page tocheck once per page.Select Warning > On to display warnings if thenozzles clog during printing.Use RemoteUI Choosing Off prohibits access from RemoteUI.Settings can only be configured from the controlpanel.Reset PaprSetngs Restores settings that you have changed with Me-dia Configuration Tool to the default values.EraseHDDDataHigh Speed Erases file management data for print job data stor-ed on the printer's hard disk. (See "Erasing Dataon the Printer's Hard Disk.") →P.693Secure High Spd. Overwrites the entire hard disk with random data.(See "Erasing Data on the Printer's Hard Disk.")→P.693Secure Overwrites the entire hard disk with 00, FF, andrandom data (one time each). Verification is per-formed to check if the data was correctly written.(See "Erasing Data on the Printer's Hard Disk.")→P.693Out-putMeth-odPrint Select the printing method for jobs received fromsoftware other than the printer driver. When usingthe printer driver, configure settings on the printer.To print as usual, select Print. Selecting Print(Auto Del) will print the job and then delete the da-ta from the printer's hard disk. Selecting Save: Box01 will only save the print job in the box, withoutprinting it.Print (Auto Del)Save: Box 01Print After Recv A setting for jobs received from software other thanthe printer driver. When using the printer driver,configure settings on the printer. Select On to printthe job after it has been saved.Save: Shared Box Select Off to print without saving jobs in the boxshared among multiple users.Printer Parts > Control Panel >Menu Settings iPF7559678
