Note• Always check the Adj. Priority values before using Adjust Length. (See "Selecting a Feed AmountAdjustment Method (Feed Priority).") →P.628• Use paper of the same type and size for adjustment as you will use for printing.Paper to PrepareRolls • An unused roll at least 10 inches wide• High-precision rulerSheets • One sheet of unused paper of at least A4/Letter size• High-precision rulerPerform adjustment as follows.1. Load the paper.• Attaching the Roll Holder to Rolls →P.585• Loading Rolls in the Printer →P.588• Loading Sheets in the Printer →P.609Note• Always make sure the loaded paper matches the type of paper specified. Adjustment cannot becompleted correctly unless the loaded paper matches the settings.2. On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.3. Press the OK button.The Set./Adj. Menu is displayed.4. Press ▲ or ▼ to select Adjust Printer, and then press the OK button.5. Press ▲ or ▼ to select Feed Priority, and then press the OK button.6. Press ▲ or ▼ to select Adjust Length, and then press the OK button.Adjustments for Better Print Quality > Adjusting the feed amount >Adjusting Line Length (Adjust Length) iPF7558634
