Setting Item Description, InstructionsSys-temSetupLanguage Specify the language used on the Display Screen.Time Zone Specify the time zone. Time zone options indicate amain city in this time zone and the difference fromGreenwich Mean Time.Length Unit Choose the display unit for length. Change the unitdisplayed for the remaining amount of roll paper,Tot.Print Area, and so on.Detect Mismatch Specify printing behavior if the type and size of pa-per specified in the printer menu does not matchthe type and size in the printer driver.Choose Pause to have printing paused under thesecircumstances. Choose Warning to continue print-ing after notification. Choose None to continueprinting without notification. Choose Hold Job tostore jobs with mismatched types and sizes of pa-per on the printer hard disk, in a print queue await-ing processing. (See "Using the Printer HardDisk.") →P.528PaperSizeBasisRoll Selection 1 If roll size detection is activated, choose whetherISO A3 (297mm) or 300mm Roll is applied whena roll of an intermediate width is detected.Roll Selection 2 If roll size detection is activated, choose whether10in. (254mm) or JIS B4 (257mm) is appliedwhen a roll of an intermediate width is detected.Keep Paper Size Choose On to use the paper size setting as the basisfor printing instead of other settings. The marginsetting of the printer menu will be used instead ofthe margin setting of the printer driver if the latteris smaller, which may prevent text or images in themargin from being printed.Choose Off to give priority to margin settings. Thelarger value is used if the margin specified in theprinter driver does not match the margin in theprinter menuTrimEdge Reload Specify whether to trim the leading edge of the cur-rently retracted roll when the roll is advanced. Cutthe edge if you are concerned about any marks lefton the roll when the roll is left in the retracted posi-tion.Printer Parts > Control Panel >iPF755 Menu Settings9677
