Paper cutting failed.Cause Corrective ActionThere are sheets left on theEjection Guide.1. Push the Release Lever back and remove the paper.2. Load the paper.3. Pull the Release Lever forward.4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-play Screen, press the OK button.Printing will resume, starting from the page on which the error occurred.(See "Loading Rolls in the Printer.") →P.588There is a foreign objectby the Output Tray, ob-structing the Cutter Unit.1. Lift the Top Cover and remove the foreign object.2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Dis-play Screen, press the OK button.Printing will resume, starting from the page on which the error occurred.You are not using theprinter under the recom-mended environmentalconditions for the paper.Use the printer only where the recommended environmental conditions for the paperare met. Note that various environmental conditions are recommended for varioustypes of paper. For details on the recommended environmental conditions for paper,see Paper Reference Guide."(See "Types of Paper.") →P.579You are using paper that isnot compatible with auto-matic cutting.1. Specify Manual as the cutting method and use scissors or a cutting tool to cut theroll.(See "Specifying the Cutting Method for Rolls.") →P.602For information about paper that is compatible with automatic cutting, see the Pa-per Reference Guide.(See "Types of Paper.") →P.5792. Push the Release Lever back and remove the paper.In other cases, the CutterUnit may be damaged.Contact your Canon dealer for assistance.End of paper feed.Cause Corrective ActionYou are pressing the ▲ button on the Control Panel and trying to rewind the roll to theedge.Release the ▲ button.Rel lever is in wrong position.Cause Corrective ActionThe Release Lever is pushed back. Pull the Release Lever forward.Turn off the printer and wait a while before restoring power.Error Message > Messages regarding paper >Paper cutting failed. iPF75513812
