Paper Detailed SettingsTo open the Paper Detailed Settings dialog box, click Settings button of the Media Type in the Custom Propertiesdialog box. You can perform the settings for ink drying time of each media and other features.Note• The settings in the Paper Detailed Settings dialog box are temporary; after the print job finishes thesettings of the printer operation panel are restored.Drying TimeBetween PagesThis sets the wait time for the ink to dry between each completely printed sheet and the output of the sheet.Setting DetailsPrinter Default The settings of the printer operating panel are applied.None The paper is ejected immediately after printing.30sec. / 1min. / 3min. / 5min. /10min. / 30min. / 60min.The sheet is ejected when the specified time after printing has elapsed.Between ScansThis sets the wait time between line scans during printing.Setting DetailsPrinter Default The settings of the printer operating panel are applied.None The printing continues to the next line immediately after the last line.1sec. / 3sec. / 5sec. / 7sec. /9sec.The printing continues to the next line after the set time.*For the media type that has problems, such as ink smears on the page or colorsthat seem uneven during borderless printing etc., increase the value for this set-ting.Windows Software > HDI Driver >iPF755 Paper Detailed Settings4355
