Note• If the Tab Selection screen is not displayed, press the Menu button.2. Press the OK button.The Set./Adj. Menu is displayed.3. Press ▲ or ▼ to select System Setup, and then press the OK button.4. Press ▲ or ▼ to select Save: Shared Box, and then press the OK button.Note• If a password has been set on the printer, the Logon screen is displayed.To change the setting, select Administrator and press the OK button. Enter the password whenAdmin.Pswd is displayed and press the OK button before going to the next procedure.If you select User and press the OK button, you can check settings values but cannot changethem.5. Press ▲ or ▼ to select Off, and then press the OK button.Setting Passwords for Personal BoxesFor greater security, you can specify a password for personal boxes. After you set a password, it will be required tomodify the personal box settings, as well as to display, print, delete, move, and modify jobs saved in the personal box.This operation is available in RemoteUI, imagePROGRAF Status Monitor, and imagePROGRAF Printmonitor.Note• By default, no passwords are set for personal boxes.• A password cannot be set for the shared mailbox.• Enter a four-digit number as the password, in the range 0001–9999.• Even if you have set passwords, they are not required to access personal boxes in Administrator Mode inRemoteUI.Using RemoteUI1. On the Stored Job page, choose the personal box.Print Jobs > Advanced Print Job Operations >Setting Passwords for Personal Boxes iPF7556556
