Setting Up Your Computer 33FILE LOCATION: C:\Documents and Settings\patricia_drake\Desktop\New Folder\D5016c20.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 1 8 / 0 4 – F O R P R O O F O N LYTo transfer data to the new computer:1 On the Now go to your old computer screen on the new computer, click Next.2 On the Where are the files and settings? screen, select the method you chose for transferringyour settings and files and click Next.The wizard reads the collected files and settings and applies them to your new computer.When all of the settings and files have been applied, the Finished screen appears.3 Click Finished and restart the new computer.Setting Up a PrinterNOTICE: Complete the operating system setup before you connect a printer to the computer.See the documentation that came with the printer for setup information, including how to:• Obtain and install updated drivers.• Connect the printer to the computer.• Load paper and install the toner or ink cartridge.• Contact the printer manufacturer for technical assistance.Printer CableYour printer may not come with a printer cable, so if you purchase a cable separately, ensure that itis compatible with your printer. If you purchased a printer cable at the same time you purchasedyour computer, the cable may arrive in the computer box.Connecting a USB PrinterNOTE: You can connect USB devices while the computer is turned on.1 Complete the operating system setup if you have not already done so.2 Install the printer driver if necessary. See the documentation that came with your printer.3 Attach the USB printer cable to the USB connectors on the computer and the printer. TheUSB connectors fit only one way.
