68 Solving Problemsw w w . d e l l . c o m | s u p p o r t . d e l l . c o mFILE LOCATION: C:\Documents and Settings\patricia_drake\Desktop\New Folder\D5016c70.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 1 8 / 0 4 – F O R P R O O F O N LY6 Wipe off the battery and put it in a safe place to dry.7 Wipe off the display.8 Remove the hard drive (see page 78).9 Remove the memory module(s) (see page 80).10 Open the display and place the computer right-side up across two books or similar props to letair circulate all around it. Let the computer dry for at least 24 hours in a dry area at roomtemperature.NOTICE: Do not use artificial means, such as a hair dryer or a fan, to speed the drying process.CAUTION: To help prevent electrical shock, verify that the computer is thoroughly dry beforecontinuing with the rest of this procedure.11 Ground yourself by touching one of the metal connectors on the back of the computer.12 Replace the memory module(s), the memory module cover, and the screw(s).13 Replace the hard drive.14 Replace any PC Cards you removed.15 Replace the battery.16 Turn on the computer and verify that it is working properly.NOTE: For information on your warranty coverage, see page 127 or the separate paper warrantydocument that shipped with your computer.If the computer does not start, or if you cannot identify the damaged components, contact Dell(see page 106).If You Drop or Damage Your Computer1 Save and close any open files, exit any open programs, and shut down the computer (seepage 36).2 Disconnect the AC adapter from the computer and from the electrical outlet.3 Turn off any attached external devices, and disconnect them from their power sources andthen from the computer.4 Remove and reinstall the battery.5 Turn on the computer.NOTE: For information on your warranty coverage, see page 127 or the separate paper warrantydocument that shipped with your computer.If the computer does not start, or if you cannot identify the damaged components, contact Dell(see page 106).