82 Adding and Replacing Partsw w w . d e l l . c o m | s u p p o r t . d e l l . c o mFILE LOCATION: C:\Documents and Settings\patricia_drake\Desktop\New Folder\D5016c80.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 1 8 / 0 4 – F O R P R O O F O N LY4 Ground yourself and install the new memory module:NOTE: If the memory module is not installed properly, the computer may not boot properly. No errormessage indicates this failure.a Align the notch in the module edge connector with the tab in the connector slot.b Slide the module firmly into the slot at a 45-degree angle, and rotate the module downuntil it clicks into place. If you do not feel the click, remove the module and reinstall it.5 Replace the cover.NOTICE: If the memory module cover is difficult to close, remove the module and reinstall it. Forcing thecover to close may damage your computer.6 Insert the battery into the battery bay, or connect the AC adapter to your computer and anelectrical outlet.7 Turn on the computer.As the computer boots, it detects the additional memory and automatically updates the systemconfiguration information.To confirm the amount of memory installed in the computer, click the Start button, click Help andSupport, and then click Computer Information.Modem and Mini PCI Card1 Complete the instructions in "Before You Begin" on page 77.2 Turn the computer over, loosen the captive screw on the modem/Mini PCI card cover, andlift the cover away from the computer.
