The following drive diagnostics and service procedures are available in this menu:v Clean Drive - The accessor takes the cleaning cartridge from the dedicatedcleaning cartridge slot (DCS), or previously reserved slot if no DCS is available,and inserts it into the drive. After the cleaning is complete, the accessor removesthe cleaning cartridge from the drive and returns it to the dedicated cleaningcartridge slot or reserved slot.v Drive Tests - Power On Self Test (POST), Normal Read/Write Test, Head Test,Media Test1. Navigate to the desired test (Service → Service → Drive Tests). Choose thedrive if more than one is installed.2. Follow the instructions displayed on the Operator Control Panel, and, ifrequired, insert a blank or scratch cartridge into the I/O Station whenrequested.3. The test will execute.– If the test PASSES, resume normal library operations.– If the test FAILS, an error will be displayed. Make note of the error, thenrefer to “Isolating Drive Sled Problems” on page 7-9.4. Remove the cartridge from the I/O Station, if needed, then close the I/OStation.5. Press Cancel to exit the screen.v Drive Power - use this item to turn drive power ON and OFFNote: When configuration changes of a disabled drive are made from theOperator Control Panel (OCP), the drive powers ON after committingchanges. When configuration changes of a disabled drive are made fromthe Web Interface (RMU), the drive does not power ON after committingchanges.Service: Display ContrastDrive TestsServiceServiceClean Drivea77ug058Drive PowerFigure 5-24. Service: Service menu5-32 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
