5. Place the defective library on a clean and sturdy work surface.6. Proceed to “Unpacking and Preparing the Replacement Library Enclosure.”Unpacking and Preparing the Replacement Library EnclosureBefore installing the replacement library enclosure, it is important to verify that theenclosure is functioning properly.1. Unpack the replacement library enclosure and place it on a sturdy and cleanwork surface near the defective library. Save all packaging materials forreturning the failing part(s) to Dell.2. Choose one of the options below for installing the foot pads.Important: Operating your library on a flat surface without foot pads maydamage your library or cause it not to function properly.v Rack Mount - temporary placement of the foot padsv Desktop - permanent placement of the foot padsa. For a rack mounted library:1) Lift the replacement library enclosure slightly above the work surface,have another person place a foot pad under each corner of the libraryand on each side of the library halfway between the front and back.2) Gently set the replacement library enclosure on top of the feet. Adjustfoot pad placement as necessary to stabilize the library. Do notpermanently attach the foot pads to the library.a77ug2441Figure 10-12. Removing the two mounting bracket screws anchoring the library to the rack (one screw on each side ofthe library)10-14 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
