Denon AVR-4520CI Owner's Manual

Also see for AVR-4520CI: Getting started guide Specification Model information Service manual

Contents

103HDMI control functionIf the HDMI control function does not operate properly, check thefollowing points.• Is the TV or player compatible with the HDMI control function?• Is “HDMI Control” (vpage 130) set to “On”?• Is “Power Off Control” (vpage 131) set to “All” or “Video”?• Is “Control Monitor” (vpage 130) set for the monitor outputconnected to television?• Is “Control Monitor” (vpage 130) set to the TV that uses theHDMI control function when this unit is connected to two TVs thatsupport HDMI connectors?• Are the HDMI control function settings of all devices correct?NOTE• When “HDMI Control” is set to “On”, it consumes more standbypower.• The HDMI control function controls operations of a TV that iscompatible with the HDMI control function. Make sure that the TVand HDMI are connected when you perform HDMI control.• Some functions may not operate depending on the connected TVor player. Check the owner’s manual of each device for detailsbeforehand.• When “Power Off Control” on the menu is set to “Off”(vpage 131), this unit is not set to standby even if the connecteddevice is in the standby mode.• When connection changes are implemented, such as addingconnections to HDMI devices, linked operations may be initialized.In this case, you will need to reconfigure the settings.• When “HDMI Control” is set to “On”, it is not possible to assign anHDMI connector to “TV AUDIO” at “Input Assign” (vpage 135).• Should any of the operations below be performed, the interlockingfunction may be reset, in which case, repeat steps 2 and 3.• “Input Assign” – “HDMI” (vpage 135) setting has changed.• “Video Output” (vpage 130) setting is changed.• There is a change to the connection between the devices and theHDMI, or an increase in devices.• The HDMI ZONE4 function is compatible with the HDMI controlfunction.• The ARC function, Power Off Control function, and Volume Controlfunction is not compatible with the HDMI ZONE4 control function.• When the HDMI ZONE4 function is used with “HDMI Control” inthe menu set to “On”, the HDMI ZONE4 control function may notfully work.• When the power in ZONE4 is on with “HDMI Control” (vpage 130)set to “On” and “Control Monitor” set to “Monitor 1” or “Monitor2” (vpage 130), the following operations occur (Some examplebehaviors are listed below.).• When the power of the TV used for MAIN ZONE is off and theplayer selected for ZONE4 starts playback, the TV used for MAINZONE is turned on. In this case, the input source selected for MAINZONE changes to the input source selected for ZONE4.• When playing back a TV used for MAIN ZONE and ZONE4 withan HDMI connection, turning off the TV used for MAIN ZONE alsoturns off this unit and the player.• When a same input source is selected for MAIN ZONE and ZONE4,stopping playback of the player on the TV stops the playback on theplayer and the video being played back in ZONE4 as well.• When the power in ZONE4 is on with “HDMI Control” (vpage 130)set to “On” and “Control Monitor” set to “ZONE4” (vpage 130),the following operations occur.• When the power of the TV used for ZONE4 is off and the playerselected for MAIN ZONE starts playback, the TV used for ZONE4is turned on. In this case, the input source selected for ZONE4changes to the input source selected for MAIN ZONE.• When playing back a TV used for ZONE4 and MAIN ZONE with anHDMI connection, turning off the TV used for ZONE4 also turnsoff the player.• When a same input source is selected for ZONE4 and MAIN ZONE,stopping playback of the player on the TV stops the playback onthe player and the video being played back in MAIN ZONE as well.