Denon AVR-4520CI Owner's Manual

Also see for AVR-4520CI: Getting started guide Specification Model information Service manual

Contents

133VideoOn Screen Display Default settings are underlined.Select the on-screen display user interface preferences.Setting items Setting detailsVolumeSets where to display themaster volume level.Bottom : Display at the bottom.Top : Display at the top.Off : Turn display off.When the master volume display is hard to see when superimposedon movie subtitles, set to “Top”.InfoDisplays status of operationtemporarily when the soundmode is changed, or inputsource is switched. Youcan set whether or not toshow each of these statusdisplays.On : Turn display on.Off : Turn display off.Now PlayingSets how long each menuis displayed when the inputsource is “NETWORK”,“iPod/USB”, or “HD Radio”.Always On : Show display continuously.Auto Off : Show display for 30 seconds after operation.TV Format Default settings are underlined.Set the video signal format to be output for the TV you are using.Setting items Setting detailsFormat NTSC : Select NTSC output.PAL : Select PAL output.“Format” can also be set by the following procedure. However, the menuscreen is not displayed.1. Press and hold the main unit’s o p for at least 3 seconds.“zVideo Format < NTSC >” appears on the display.2. Use the main unit’s o p and set the video signal format.3. Press the main unit’s ENTER to complete the setting.NOTEWhen a format other than the video format of the connected TV is set, thepicture will not be displayed properly.