Denon AVR-4520CI Owner's Manual

Also see for AVR-4520CI: Getting started guide Specification Model information Service manual

Contents

151GeneralLanguage Default settings are underlined.Set the language for display on the menu screen.Setting detailsEnglish / Français / Español“Language” can also be set by the following procedure. However, the menu screen is not displayed.Following the display content to make the setting.1. Press and hold the main unit’s o p for at least 3 seconds.“zVideo Format < NTSC >” appears on the display.2. Press the main unit’s i and set “zGUI Language < ENGLISH >”.3. Use the main unit’s o p and set the language.4. Press the main unit’s ENTER to complete the setting.ZONE2 Setup / ZONE3 Setup Default settings are underlined.Set the audio to play back with multi-zone (ZONE2, ZONE3).Setting items Setting detailsBassAdjust bass tones.–10dB – +10dB (0dB)TrebleAdjust treble tones.–10dB – +10dB (0dB)High Pass FilterMake settings for cuttingthe low range to reducedistortion in the bass.On : The low range is attenuated.Off : The low range is not attenuated.Lch LevelAdjust the left channeloutput level.–12dB – +12dB (0dB)Rch LevelAdjust the right channeloutput level.–12dB – +12dB (0dB)Setting items Setting detailsChannelSet the signal output frommulti-zone.Stereo : Select stereo output.Mono : Select monaural output.When “Assign Mode” (vpage 141) is set to “7.1ch + ZONE2/3-MONO”, the “Channel” setting is automatically set to “Mono”.Volume LevelSet the volume output level.Variable : Volume adjustment is enabled by main unit and remote controlunit.40 (–40dB) : Fix volume at 40 (–40 dB). Set when adjusting volume byexternal amplifier.80 (0dB) : Fix volume at 80 (0 dB). Set when adjusting volume by externalamplifier.When “Assign Mode” (vpage 141) is set to “7.1ch + ZONE2”,“5.1ch + ZONE2/3”, “7.1ch + ZONE2/3-MONO” or “5.1ch(Bi-Amp) + ZONE2”, the “Volume Level” setting is automatically set to“Variable”.Volume LimitMake a setting formaximum volume.60 (–20dB) / 70 (–10dB) / 80 (0dB)Off : Do not set a maximum volume.This is displayed from –79 dB to 18 dB when “Scale” (vpage 124)is set to “–79.5dB – 18.0dB”.Power On VolumeDefine the volume settingthat is active when thepower is turned on.Last : Use the memorized setting from the last session.Mute : Always mute when power is turned on.1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level.This is displayed from –79 dB to 18 dB when “Scale” (vpage 124)is set to “–79.5dB – 18.0dB”.Mute LevelSet the amount ofattenuation when mutingis on.Full : The sound is muted entirely.–40dB : The sound is attenuated by 40 dB down.–20dB : The sound is attenuated by 20 dB down.