Denon AVR-4520CI Owner's Manual

Also see for AVR-4520CI: Getting started guide Specification Model information Service manual

Contents

155GeneralSetting items Setting detailsNotificationsDisplays a notificationmessage on this unit’smenu screen when thelatest firmware is releasedwith “Update”.Display a notificationmessage on this unit’smenu screen whendownloadable firmware isreleased with “Add NewFeature”.Update : The notification message is displayed for about 20 seconds whenthe power is turned on. Connect to broadband Internet (vpage 31)when using this function.• On : Display update message.• Off : Do not display update message.• When you press ENTER during display of thenotification message, the “Check for Update”screen is displayed (Refer to page 154 formore information on “Update”).• Press o or BACK to erase the notificationmessage.Upgrade : The notification message is displayed for about 20seconds when the power is turned on. Connect to broadband Internet(vpage 31) when using this function.• On : Display upgrade message.• Off : Do not display upgrade message.• When you press ENTER during display of the notification message, the“Add New Feature” screen is displayed (Refer to page 155 for moreinformation on “Add New Feature”).• Press o or BACK to erase the notification message.Setting items Setting detailsAdd New FeatureDisplay new features thatcan be downloaded tothis unit and perform anupgrade.NOTEIn cases where it is notpossible to connect to thenetwork after adding anew function, connect tothe network again using“Network” (vpage 146).Upgrade Package : Display the items to be upgraded.Upgrade Status : Display a list of the additional functions provided bythe upgrade.Upgrade Start : Execute the upgrade process.When the upgrade starts, the power indicator becomes red and the menuscreen is shut down. During the upgrade, the amount of upgrade timewhich has elapsed is displayed.When upgrading is complete, the power indicator becomes green andnormal status is resumed.• If the upgrade is not successful, an error message identical to those in“Update” will appear on the display. Check the settings and networkenvironment and then perform the upgrade again.See the DENON website for details about upgrades.When the procedure is complete, “Registered” is displayed in thismenu and upgrades can be carried out. If the procedure has not beencarried out, “Not Registered” is displayed.The ID number shown on this screen is needed when carrying outthe procedure.The ID number can also be displayed by pressing and holding the mainunit’s u and INFO for at least 3 seconds.Notes concerning use of “Update” and “Add New Feature”• In order to use these functions, you must have the correct system requirements and settings for abroadband Internet connection (vpage 31).• Do not turn off the power until updating or upgrading is completed.• Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/upgrading procedure to be completed.• Once updating/upgrade starts, normal operations on this unit cannot be performed until updating/upgrading is completed. Furthermore, there may be cases where backup data is reset for theparameters, etc., set on this unit.• If the update or upgrade fails, press and hold the X on the main unit for more than 5 seconds, orremove and re-insert the power cord. “Update retry” appears on the display and update restarts fromthe point at which update failed. If the error continues despite this, check the network environment.• Information regarding the “Update” function and “Add New Feature” will be announced on the DENONweb site each time related plans are defined.• When usable new firmware is released with “Update” or “Add New Feature”, a notification messageis displayed on the menu screen. When you do not want to be notified, set “Notifications” – “Update”(vpage 155) and “Notifications” – “Upgrade” (vpage 155) to “Off”.