137InputsSource RenameChange the display name of the selected input source.This is convenient when the input source name of your device and the input source name of this unit aredifferent. You can change the name to suit your needs. When the renaming is completed, the name isdisplayed on this unit’s display and on the menu screen.Setting detailsCBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / CD / TV AUDIO / PHONO :Change the display name of the selected input source.• Up to 12 characters can be input.• For character input, see page 118.Set Defaults : The “Source Rename” settings are returned to the defaultsettings.• Reset : Reset to the defaults.• Cancel : Do not reset to the defaults.If you select “Set Defaults” and press ENTER, the message “Reset allsource names to the factory defaults?” is displayed. Select “Reset” or“Cancel”, and then press ENTER.Hide Sources Default settings are underlined.Remove from the display input sources that are not used.Setting detailsCBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / iPod/USB / CD / HD Radio /Favorites / Internet Radio / Pandora / SiriusXM / Spotify / Flickr / TV AUDIO / PHONO : Select inputsource that is not used.• Show : Use this source.• Hide : Do not use this source.NOTE• Input sources being used in the various zones cannot be deleted.• Input sources set to “Hide” cannot be selected using the input source select button.Source Level Default settings are underlined.• This function corrects the playback level of the selected input source’s audio input.• Make this setting if there are differences in the input volume levels between the different sources.Setting items Setting detailsSource LeveliPod/USB HD RadioNETWORK–12dB – +12dB (0dB)Analog InputsCBL/SAT DVDBlu-ray GAMEAUX1 AUX2MEDIA PLAYER CDTV AUDIO PHONO–12dB – +12dB (0dB)The analog input level can be adjusted independently for input sourcesfor which “ANALOG” is assigned at “Input Assign” (vpage 136).Digital InputsCBL/SAT DVDBlu-ray GAMEAUX1 AUX2MEDIA PLAYER CDTV AUDIO–12dB – +12dB (0dB)The digital input level can be adjusted independently for input sourcesfor which “DIGITAL” is assigned at “Input Assign” (vpage 136).