Denon AVR-4520CI Owner's Manual

Also see for AVR-4520CI: Getting started guide Specification Model information Service manual

Contents

187Surroundn Types of input signals, and corresponding sound modesThis table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode.Symbols in the tableF This indicates the default sound mode.S This indicates the selectable sound mode.Sound Mode (vpage 84) NOTEInput signal types and formatsANALOGPCM DTS-HD DTS DOLBY DOLBY DIGITAL Super Audio CDPCM(multi ch)PCM(2ch)DTS-HDMasterAudioDTS-HDHighResolutionAudioDTSEXPRESSDTS ESDSCRT(With Flag)DTS ESMTRX(With Flag)DTS(5.1ch)DTS96/24DOLBYTrueHDDOLBYDIGITALPlusDOLBYDIGITAL EX(With Flag)DOLBYDIGITAL EX(With noFlag)DOLBYDIGITAL(5.1ch)DOLBYDIGITAL(2ch)DSD(multi ch)DSD(2ch)DTS SURROUNDDTS-HD MSTR z1 FDTS-HD HI RES z1 FDTS ES DSCRT6.1 z2 FDTS ES MTRX6.1 z2 FDTS SURROUND z1 S S FDTS 96/24 z1 FDTS (–HD) + PLgx Cinema z3 S S S S SDTS (–HD) + PLgx Music z2 S S S S SDTS (–HD) + PLgz z4 S S S S S S SDTS EXPRESS z1 FDTS (–HD) + NEO:X Cinema S S S S S S SDTS (–HD) + NEO:X Music S S S S S S SDTS (–HD) + NEO:X Game S S S S S S SDTS NEO:X Cinema z1 S S SDTS NEO:X Music z1 S S SDTS NEO:X Game z1 S S SAudyssey DSX® S S S S S S Sz1 If “Audyssey DSX®” (vpage 126) is set to “Wides/Heights”, “Heights” or “Wides”, the Audyssey DSX® effect is added to the sound mode marked with z1.z2 If “Speaker Config.” – “Surr. Back” (vpage 142) is set to “None”, this sound mode cannot be selected.z3 If “Speaker Config.” – “Surr. Back” (vpage 142) is set to “1spkr” or “None”, this sound mode cannot be selected.z4 If “Speaker Config.” – “Front Height” (vpage 142) is set to “None”, this sound mode cannot be selected.