Denon AVR-4520CI Owner's Manual

Also see for AVR-4520CI: Getting started guide Specification Model information Service manual

Contents

37Set up speakers (Audyssey® Setup)14 Select “Store” and then press ENTER.Save the measurement results.Audyssey SetupNow storing...Please wait.50%Audyssey SetupDistancesSpeaker Config.LevelsCrossoversStoreCheck processing results. To proceed, press “Store”.• Saving the results requires about 20 seconds.• During saving of measurements results, “Now storing...Pleasewait.” is displayed. When saving is completed, “Storing complete.Audyssey® Setup is now finished. Please unplug microphone.” isdisplayed.NOTEDuring saving of measurement results, be sure not to turn off thepower.15 Unplug the setup microphone from the unit’s SETUPMIC jack.16 Set Audyssey Dynamic Volume®.Audyssey SetupYesNoYou can set Dynamic Volume function, which automaticallyadjust volume level for all content.Do you want to enable?• This feature adjusts the output volume to the optimal level whileconstantly monitoring the level of the audio input to the unit.Optimal volume control is performed automatically without anyloss in the dynamism and clarity of the sound when, for example,the volume suddenly increases for commercials shown duringtelevision programs.n When turning Dynamic Volume on• Press u to select “Yes”, and then press ENTER.The unit automatically enters “Medium” (vpage 126) mode.n When turning Dynamic Volume off• Press i to select “No”, and then press ENTER.NOTEAfter performing Audyssey® Setup, do not change the speakerconnections or subwoofer volume. In event of a change, performAudyssey® Setup again.Store FinishCheck13 Use ui to select the item youwant to check, and then pressENTER.Audyssey SetupDistancesSpeaker Config.LevelsCrossoversStoreCheck processing results. To proceed, press “Store”.• Subwoofers may measure a greater reported distance thanthe actual distance due to added electrical delay common insubwoofers.• If you want to check another item, press BACK.NOTE• If the result differs from the actual connection status, or if “Caution!”is displayed, see “Error messages” (vpage 38). Then carry outAudyssey® Setup again.• If you change speaker positions or orientation, perform Audyssey®Setup again to find the optimal equalizer settings.