41Playback (Basic operation)Setup (vpage 33)n Turning the power on (vpage 41)n Selecting the input source (vpage 41)n Adjusting the master volume (vpage 42)n Turning off the sound temporarily (vpage 42)n Playing a Blu-ray Disc player/DVD player(vpage 42)n Playing a Blu-ray Disc player compatible withDenon Link HD (vpage 42)n Playing Super Audio CD (vpage 43)n Playing a CD player (vpage 43)n Playing an iPod (vpage 44)n Playing a USB memory device (vpage 47)n Listening to HD Radio stations (vpage 50)n Listening to Internet Radio (vpage 59)n Playing back files stored on a PC and NAS(vpage 62)n Using online services (vpage 66)n Convenient functions (vpage 76)n AirPlay function (vpage 82)Selecting a listening mode (Sound Mode)(vpage 84)Playback (Advanced operation) (vpage 102)Important informationBefore starting playback, make the connections between the differentdevices and the settings on the unit.NOTEAlso refer to the operating instructions of the connected deviceswhen playing them.Turning the power onPress POWER X to turn on power tothe unit.The power indicator flashes green and thepower turns on.You can also switch the power to standby by pressing X on the mainunit.n When power is switched to standbyPress POWER X.GPower indicator status in standby modeH• Normal standby : Off• When “HDMI Pass Through” or “HDMI Control” (vpage 130)is set to “On” : Red• When “Network” (vpage 147) is set to “Always On” : Red• When a mobile device that supports MHL is being charged : RedSelecting the input sourcePress the input source select button(CBL/SAT, Blu-ray, GAME, MEDIAPLAYER, DVD, AUX1, AUX2, CD,TUNER, PHONO, NETWORK, TVAUDIO, iPod/USB or INTERNETRADIO) to be played back.The desired input source can be selecteddirectly.You can also use the following operation to select an inputsource.n Select the input source using the main unitTurn SOURCE SELECT.• Turning SOURCE SELECT switches the input source, as shownbelow.GAME AUX1 AUX2MEDIAPLAYERiPod/USBHD RadioNETWORK CDTV AUDIOPHONOBlu-rayDVDCBL/SAT