Denon AVR-4520CI Owner's Manual

Also see for AVR-4520CI: Getting started guide Specification Model information Service manual

Contents

127AudioGraphic EQ Default settings are underlined.Use the graphic equalizer to adjust the tone of each speaker.“Graphic EQ” can be set when “MultEQ® XT 32” setting (vpage 125) is “Graphic EQ”.Setting items Setting detailsSpeaker SelectionSelect whether to adjusttones for individual speakersor for all speakers.All : Adjust the tone of all speakers together.Left/Right : Adjust the tone of left and right speakers together.Each : Adjust the tone of each speaker.Adjust EQAdjust tones for eachfrequency band. Adjustthe speaker selected in“Speaker Selection”.q Select the speaker.w Select the adjustment frequency band.63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz• Select the speakers you want to adjust when “Left/Right” or “Each”is selected.e Adjust the level.–20.0dB – +6.0dB (0.0dB)Curve CopyCopy “Audyssey Flat”(vpage 125) curve fromMultEQ® XT 32.Yes : Copy.No : Do not copy.• “Curve Copy” is displayed after Audyssey® Setup has been performed.• When you select “Curve Copy” and press ENTER, the “Copy “AudysseyFlat”?” prompt is displayed. Select either “Yes” or “No”, and pressENTER.Set DefaultsThe “Graphic EQ” settingsare returned to the defaultsettings.Reset : Reset to the defaults.Cancel : Do not reset to the defaults.When you select “Set Defaults” and pressENTER, the “Reset to the default values?”prompt is displayed. Select either “Reset” or“Cancel”, and press ENTER.