Denon AVR-4520CI Owner's Manual

Also see for AVR-4520CI: Getting started guide Specification Model information Service manual

Contents

129VideoPicture Adjust Default settings are underlined.Picture quality can be adjusted.We recommend leaving the settings unchanged from the default settings. First adjust the display imagequality on your TV, and use this menu only when you want to make fine adjustments.• This item can be set when the input source is CBL/SAT DVD Blu-ray GAME AUX1 AUX2MEDIA PLAYER iPod/USB NETWORK .• With input sources other than the ones above, this item can be set when “Video Select” is selected. Inthis case, the original input source settings are called out.• Can be set when the “Video Conversion” setting (vpage 131) is “On”.• “TV AUDIO” or “CD” can be set when “HDMI”, “COMP” or “VIDEO” (vpage 135, 136) has beenassigned.Setting items Setting detailsPicture ModeSelect the desired picturemode according to the videosignals and your viewingenvironment.Standard : The standard mode suited for most living room viewingenvironments.Movie : A mode suited for watching movies in a dark room such as atheater room.Vivid : A mode that makes graphic images for games, etc. brighter andmore vivid.Streaming : A mode suited for low bit rate video sources.Custom : Adjusts the picture quality manually.Off : No picture quality adjustment is done with this unit.• You can also press OPTION to make these settings from “Picture Mode”(vpage 80) in the option menu.• The default settings are as follows.• For “Network” and “iPod/USB” input sources : Streaming• For input sources other than “Network” and “iPod/USB” : OffContrastAdjust picture contrast.–6 – +6 (0)“Contrast” can be set when “Picture mode” is set to “Custom”.BrightnessAdjust picture brightness.0 – +12“Brightness” can be set when “Picture mode” is set to “Custom”.SaturationAdjust picture chroma level(saturation).–6 – +6 (0)“Saturation” can be set when “Picture mode” is set to “Custom”.HueAdjust green and redbalance.–6 – +6 (0)“Hue” can be set when “Picture mode” is set to “Custom”.Setting items Setting detailsNoise ReductionReduce overall video noise.Low / Medium / High / Off“Noise Reduction” can be set when “Picture mode” is set to“Custom”.EnhancerEmphasize picture contours.0 – +12“Enhancer” can be set when “Picture mode” is set to “Custom”.• “Picture Adjust” can not be set when 4K signals are input.• When TVs are simultaneously connected to HDMI MONITOR OUT 1, HDMI MONITOR OUT 2,COMPONENT VIDEO OUT and VIDEO MONITOR OUT connector for inputting video or componentvideo signals, the “Picture Mode” – “Streaming”, “Noise Reduction” and “Enhancer” settings are onlyvalid for the TV that is connected via HDMI.HDMI Setup Default settings are underlined.Make settings for HDMI video/audio output.Setting items Setting detailsAuto Lip SyncMake automaticcompensation for timingshift in audio and videooutput.On : Compensated.Off : Not compensated.HDMI Audio OutSelect HDMI audio outputdevice.AVR : Play back through speakers connected to the unit.TV : Play back through TV connected to the unit.• The audio signal input from the HDMI input connector can be output asan output signal from the HDMI output connector by setting the HDMIaudio output destination to TV.Audio signals input via the Analog/Coaxial/Optical/EXTERNAL.IN inputconnectors cannot be output from the HDMI output connector.• When the HDMI control function is activated, priority is given to the TVaudio setting (vpage 102 “HDMI control function”).