Denon AVR-4520CI Owner's Manual

Also see for AVR-4520CI: Getting started guide Specification Model information Service manual

Contents

104InstaPrevue functionYou can display sub screens on the main screen to preview playbackvideo of the HDMI input connected to this unit. You can also displayvarious video inputs in a single screen to switch input sources such asBlu-ray, DVD, and GAME while viewing them on sub screens.The InstaPrevue function is compatible with the HDMI1 – 6connectors. It is not supported for the HDMI7 / MHL connectors.Switching input sourcesSwitch to the desired input source on this unit while viewing subscreens.1 Press ZONE SELECT to switchthe zone mode.The J indicator lights.2 Press InstaPrevue.The main screen (current input video)and sub screens (other input video) aredisplayed.3 Use uio p to select thedesired input source from thesub screen, and press ENTER.n To operate devices with the remotecontrol unit of this unit afterselecting the input source:While sub screens are displayed, press aninput source select button to select thedesired input source.Before you can perform this operation, you must register presetcodes for the remote control unit (vpage 157).Setting how to display sub screensYou can select to display five sub screens or only one sub screen.1 While sub screens are displayed,press OPTION.The InstaPrevue setting screen isdisplayed.2 Press o p in “HDMI Input” toselect how to display sub screens.All Displays five sub screens.One at time Displays only one sub screen.3 Press OPTION to enter the setting.Changing the display location of subscreensYou can change the display location of sub screens to a desiredlocation.1 While sub screens are displayed,press OPTION.The InstaPrevue setting screen isdisplayed.2 Press i to select “Location” anduse o p to select the locationwhere you want to display subscreens.• The locations where sub screens can be displayed differ accordingto the “HDMI Input” setting.n When “HDMI Input” is set to “All”Bottom TopLeftRight• The default setting is “Bottom”.n When “HDMI Input” is set to “One at time”BottomLeftTopLeftTopRightBottomRight• The default setting is “Bottom Left”.3 Press OPTION to enter the setting.NOTE• The InstaPrevue function is available when HDMI signals are inputto the main screen. However, it is not available while computer’sresolution (e.g. VGA) or 3D video contents is being played back.• The InstaPrevue function is not available for the ZONE4 HDMImonitor output. It is also not available when the power in ZONE4is on.