Denon DVD-A11 Operating Instructions Manual

Also see for DVD-A11: Service manual Operating instructions

Lights when the audio signals can be down-mixed.12ENGLISH• PURE DIRECT (AUDIO) MODE:The circuits not being used (output signals)can be turned off.NORMAL:This turns the PURE DIRECT mode off. Allsignals are output.VIDEO OFF:This turns the video output off. Use this whenonly using audio signals.DIGITAL OFF:This turns the digital output off.ALL OFF:This turns the digital output, display and videooutput off.• DVI (VIDEO output) SETUP MODE:Use this to set the DVI connector’s videosignal output.DVI OFF:No signal from the DVI-D connector.480P:480P video signals are output from the DVI-Dconnector.720P:720P video signals are output from the DVI-Dconnector.1080i:1080i video signals are output from the DVI-Dconnector.✽ When the DVI-D connector output thesignals, no programme signals from thecomponent video connector.• DVI BK (Black) LEVEL:This switches the digital RGB video level (datarange) of the DVI-D terminal.NORMAL:Video level (data range): 16 (black) to 235(white)ENHANCED:Video level (data range): 0 (black) to 246(white)✽ When the DVI-D terminal is connected,the black may seem to stand out,depending on the TV or Monitor you areusing. In this case, set this to“ENHANCED”.(2) Rear Panel@1 DVI-D-Video output connector(DVI-D OUT)• Connect using DVI-D connection cord(available in stores).@2 Component video output connectors(COMPONENT VIDEO OUT)• Connect using video cords (available instores).@3 S-Video output connector(S-VIDEO OUT)• Connect using an S-Video connection cord(available in stores).@4 Video output connector (VIDEO OUT)• Connect using the included video cord.@5 Digital output connector (IEEE 1394)• This is for connection of a separately sold AVamplifier equipped with a IEEE 1394connector.• Use it to achieve high quality digital soundwith low data loss.@6 Digital output connector(DENON LINK)• This is for connection of a separately sold AVamplifier equipped with a Denon Linkconnector.• Use it to achieve high quality digital soundwith low data loss.@7 Digital audio output connector(OPTICAL)• Connect using an optical fiber cable (availablein stores).• Digital data is output from this connector.@8 Digital audio output connector(COAXIAL)• Connect using an digital audio cord. Connect acommercially available 75 Ω/ohms pin-plugcord.• Digital data is output from this connector.@9 Control connector (RS-232C)• This is a terminal for future system expansion.#0 Control input connector(ROOM TO ROOM/IN)• This is the input connector for wired remotecontrol.Consult your DENON dealer if you wish to usethis connector.#1 Control output connector(ROOM TO ROOM/OUT)• This is the output connector for wired remotecontrol.Consult your DENON dealer if you wish to usethis connector.#2 Audio output connectors(AUDIO OUT)• Connect using the included audio cord.#3 21-pin SCART terminal (AV1/AV2)(For only European model)• Connect using a 21-pin SCART cable (availablein stores).#4 Power input (AC IN)• Connect to AC power supply using theincluded power supply cord.(3) DisplayLights during playback of multiple angles disc.Lights to indicate the currently playing disc.These light to indicate the names of the sections of the discbeing played.Lights to indicate the currently playing audio format.Lights to indicate the currently playingaudio channel.L: Front left channelC: Center channelR: Front right channelSL: Surround left channelS: Mono surround channelSR: Surround right channelLFE: Low frequency effectLights to indicate thecurrently playing videotype.F: Film sourceV: Video sourceLights during playback, flashes when the resume play memory function is activated.Lights in the programmed play mode.Lights in the still/pause mode.Displays the title, track numberand elapsed time duringplayback.These light to indicatethe time display mode.Lights when progressive videosignals are being output.Lights in the repeat play mode.Lights in the random play mode.