1 SmartWire-DT Gateway EU5C-SWD-EIP-MODTCP1.3 Versions10 SmartWire-DT Gateway EU5C-SWD-EIP-MODTCP 08/17 MN120003Z EN www.eaton.comThe SmartWire-DT line, along with its modules, is connected to the gateway.The ribbon cable, with the SWD modules and all connection components -such as blade terminals and external device plugs - is referred to as the"SWD line."Terminals for two 24-V power supplies are available: POW for the gatewayand the SmartWire-DT modules and AUX for powering the contactor coils ifthese are also operated via SmartWire-DT modules.The 8-pin ribbon cable is used to run data communications, as well as thepower for the SmartWire-DT modules and the contactor coils, from the gate-way to the modules.The diagnostic port is used to connect to a computer in order to run the SWDassist planning and commissioning program.1.3 Versionsa Power supply, 24 V DC POWb Fieldbus interfacec Diagnostics interfaced Configuration buttonse LED indicators: POW, MS, Config, SWDf Power supply, 24 V DC AUXg SmartWire-DT connectionh Dip switch for address settingFigure 2: Front viewEU5C-SWD-EIP-MODTCPahbcdefg
