5 Commissioning the PLC programming environment5.3 Web-InterfaceSmartWire-DT Gateway EU5C-SWD-EIP-MODTCP 08/17 MN120003Z EN www.eaton.com 515.3 Web-InterfaceThe web interface can be used to access the EU5C-SWD-EIP-MODTCP gate-way.The following functions are supported via the WEB interface:• Showing the gateway's device parameters• Showing the gateway's and SWD line's statuses• Showing all connected SmartWire-DT modules with their serial num-bers, statuses, etc.• Showing and changing network settings• Showing and changing password protection• Updating the operating systemTo establish a connection to the gateway using the web interface, follow thesteps below:▶ Open one of the following browsers:Internet Explorer 6 or higher or Mozilla Firefox 3 or higher▶ Enter the gateway's IP address as the URL.The default address is: 192.168.1.254.The homepage, showing the most important information concerning thegateway, will appear.Figure 33: Web interface homepage
