7 Modbus/TCP – SmartWire-DT implementation7.5 Acyclic data communications80 SmartWire-DT Gateway EU5C-SWD-EIP-MODTCP 08/17 MN120003Z EN www.eaton.comBIT Name Description4 DIAG 0: There are currently no diagnostic messages from the module.1: There is at least one diagnostic message. The exact cause of the diagnosticmessage can be read by using acyclic services."SmartWire-DT Modules IP20", MN05006001Z, describes the various possible diag-nostic alarms for each SmartWire-DT module.6 PRSNT 0: Communications cannot be established between the gateway (SmartWire-DT coor-dinator) and the SmartWire-DT module.All input data has a value of 0.1: The SmartWire-DT module is present and is exchanging data with the gateway(SmartWire-DT coordinator).7 SUBST 0: The planned SmartWire-DT module is present1: An M22-NOP(C) universal module is present instead of the planned SmartWire-DTmodule