www.eaton.comNetworkManagement Card(Network-MS)User ManualNetwork Management Card – User Manual 34003991XT_EN/JC Page 110/143Examples #> getAuth SessionTimeComments6.4.7.2 “setAuth”Purpose To modify an Authentication settingSyntax syntax: setAuth [options...]options:SessionTime=xx <-- in sec. 1..9999 -->MaxSessionTime=xx <-- in sec. 1..9999 -->AuthOrder=Local_Only|Local_External|External_Local|External_Only(1)AuthMethod=LOCAL|RADIUS|LDAPExamples #> setAuth SessionTime =200Comments (1) : Writing enabled according to “AuthMethod” status6.4.7.3 ”getRadPrimSrv”Purpose To read an Radius primary server settingSyntax syntax: getRadPrimSrv [options...]options:Server Enable <-- 0=No, 1=Yes -->Server ServerNameServer SharedSecretServer PortServer NasIdentiferTypeServer RetryServer TimeoutExamples #> getRadPrimSrv PortComments6.4.7.4 “setRadPrimSrv”Purpose To modify an Radius primary server settingSyntax syntax: setRadPrimSrv [options...]options:Server Enable <-- 0=No, 1=Yes -->(1)Server ServerName="Server Name"(1) (2)Server SharedSecret="Shared Secret"(1) (2)Server Port=xx <-- 1..65535 -->(1) (2)Server NasIdentiferType=IPV4|IPV6_1|IPV6_2|IPV6_LOCAL(1) (2)Server Retry=xx <-- 1..9999 -->(1) (2)Server Timeout=xx <-- 1..9999 -->(1) (2)Examples #> setRadPrimSrv Port =1812
