www.eaton.comNetworkManagement Card(Network-MS)User ManualNetwork Management Card – User Manual 34003991XT_EN/JC Page 47/1434.3 Notification4.3.1 Email NotificationThe card offers the possibility of redirecting UPS alarms to an e-mail server. The format of these e-mails iscompatible with mobile telephone transfer systems using text messages (SMS).SMS notification requires the use of a third-party application that converts emails to SMS.• Recipient List:On the left side of this page, up to four recipients can be configured to receive e-mails from the card.Each addressee has its own trigger events, selected from the right side of the page, for which an e-mailis sent. The card’s log indicates e-mail transmission errors.Each recipient is configured with the following parameters:w Recipient: (Field is limited to 99 characters) this is the e-mail address of the personor department to receive the e-mail.The default value is : recipientx@domain.comw eNotify: This parameter enables communications to the Eaton eNotify Monitoringand Diagnostics Service. NOTE: Available only for customers with a valid eNotifyService Contract.w Attached files: The files selected (Measurements, Event log, System log,Environment measurements) are enclosed with each e-mail sent. The files are sent
