www.eaton.comNetworkManagement Card(Network-MS)User ManualNetwork Management Card – User Manual 34003991XT_EN/JC Page 3/1434.2.2 On-line help 374.2.3 Logging In 384.2.4 UPS control 394.2.5 UPS weekly schedule programming 414.2.6 Shutdown parameters 424.2.7 Measurements 444.2.8 Event log 454.2.9 System log 464.3 NOTIFICATION 474.3.1 Email Notification 474.3.2 E-mail Message Settings 494.4 CONFIGURATION 514.4.1 Network settings 514.4.2 RADIUS 544.4.3 LDAP 564.4.4 System 594.4.5 Notified Applications 604.4.6 Central shutdown configuration 634.4.7 Access control 644.4.8 SNMP Setting 664.4.9 Date and time 684.4.10 Firmware upload 704.5 ENVIRONMENT SENSOR (OPTION) 714.5.1 Characteristics 714.5.2 Environment Status 724.5.3 Environment Settings 734.5.4 Log 755 SERVER PROTECTION 765.1 SET-UP OF THE SHUTDOWN PARAMETERS 765.1.1 Shutdown criteria managed by the Network Management Card 765.1.2 Controlled outlets 795.1.3 Protection of a server connected to a controlled outlet 795.2 THE DIFFERENT SERVER AND UPS SHUTDOWN SEQUENCES 815.2.1 Extended power outage, shutdown initiated by the Shutdown Timer (Shutdown after) 815.2.2 Extended power outage, shutdown initiated by the "Low battery power" message 815.2.3 Case of power restoration before the end of the "shutdown duration" counter 825.3 SHUTDOWN MANAGEMENT WITH 2 NMC BOARDS 835.3.1 Shutdown Duration 835.3.2 Settings 836 TELNET/SSH/CLI INTERFACES 84
