Eaton Network-MS User Manual

Also see for Network-MS: Quick start guide

Contents

www.eaton.comNetworkManagement Card(Network-MS)User ManualNetwork Management Card – User Manual 34003991XT_EN/JC Page 93/143------------------------------------------------------------------------NETWORK MANAGEMENT CARDNetwork settings - SNMP------------------------------------------------------------------------1 : Version (Disabled, V1, V3, V1V3) [V1V3]2 : SNMP port (Default value: 161) [161]** About V1 **3 : Community read-only [publicuser]4 : SNMP write (0=No, 2=Yes) [2]5 : Community write [privateuser] (1)** About V3 **6 : Read-only user [readuser]7 : R/O security (1=No Auth, 2=Auth NoPriv, 3=Auth Priv) [2]8 : Read-only password [***********] (2)9 : Read-Write user [writeuser]10 : R/W security (1=No Auth, 2=Auth NoPriv, 3=Auth Priv) [2]11 : Read-Write password [***********] (3)12 : Notification user name [notifuser]0 : Exit----------------------------------------------------------------------All items from 3 to 11 are read-write or masqued according to “Version” status.(1) Read-write or read-only according to “SNMP write” status;(2) Write-only or hidden according to “R/O security” status; the length has to be 8 characters at least;(3) Write-only or hidden according to “R/W security” status; the length has to be 8 characters at least.6.3.5 Trap receivers menuThis menu is used to view or modify the applications receiving traps and to configure trap type.------------------------------------------------------------------------NETWORK MANAGEMENT CARDTrap receiver------------------------------------------------------------------------1 : Receiver 12 : Receiver 23 : Receiver 30 : Exit------------------------------------------------------------------------