www.eaton.comNetworkManagement Card(Network-MS)User ManualNetwork Management Card – User Manual 34003991XT_EN/JC Page 48/143in CSV formatw Periodic report: In addition to the e-mails sent when events occur, a periodic e-mailcontaining the 3 log files (or 4 when the optional Sensor is connected) can be sentto the recipient every x days at the time specified by the user.To configure the first transmission, specify the day, time and frequency of the nexttransmission in the "next report" box. After this date, the page will show the dateand time of the next transmission.Data are sent in CSV format.• Save: Saves any modifications.• Test: enables an e-mail to be sent to the recipient immediately. This is one way of checking e-mailtransmission, particularly access to the SMTP server configured in "Network" settings. A transmissionreport is added to the system log.The event label in the subject and text of the message is replaced with a test label.If the user makes any modifications to the page, they must be saved before using the "Test" function.• Notified events:The right side of the page shows the events that can be notified.By default, two events are selected for notification. The user can modify this pre-selection byticking other events or can, on the contrary, restore the initial configuration by clicking SetDefault.• Email Message Settings: access to the message configuration page• Network Settings: enables the name of the SMTP server to be entered. See page
