Eaton Network-MS User Manual

Also see for Network-MS: Quick start guide

Contents

www.eaton.comNetworkManagement Card(Network-MS)User ManualNetwork Management Card – User Manual 34003991XT_EN/JC Page 49/1434.3.2 E-mail Message SettingsThis page enables customisation of the content of the messages received by recipients of e-mails sent by thecard.Customisation is common to the four recipients that can be notified (see E-mail notification).• Sender: (59 characters maximum) identifies the source of the message. The default value isups@domain.com.This field is free. However, depending on the type of SMTP server configuration, it is possible that theserver checks that the domain name contained in the Sender address exists, and even that the user inthe Sender address belongs to this domain.• Subject: enables the user to specify the subject of the e-mail to be sent. By entering some free text andselecting from several optional fields, if desired, the message subject is built:- UPS name recalls the name of the UPS; it may or may not be selected.- UPS location recalls the geographic location of the UPS (see System Settings); it may or may not beselected.- Event message identifies the event generating the e-mail; it may or may not be selected.• Message text is a free zone long of 255 characters maximum.The body of the e-mail sent is composed of:- Message text, which is free text.- The date and time of the event, as saved in the log.- URL of the card, enabling a direct link with the card to be established.- Attachments, as configured for the e-mail recipients.- Duplication of the subject, as configured.