Eaton Network-MS User Manual

Also see for Network-MS: Quick start guide

Contents

www.eaton.comNetworkManagement Card(Network-MS)User ManualNetwork Management Card – User Manual 34003991XT_EN/JC Page 94/143------------------------------------------------------------------------NETWORK MANAGEMENT CARDTrap receiver X------------------------------------------------------------------------1 : Hostname or IP address [xxx. xxx. xxx. xxx]2 : Application mane [MyTrap]3 : Trap Port (Default value: 162) [162 ]3 : Trap community [ ]4 : Protocol (Disabled, V1, V3, V1V3) [Disabled]5 : MIB filter (b0=Pulsar, bit1=Power MIB, bit2=IETF) [2] (1)0 : Exit----------------------------------------------------------------------(1) Only the 3 less significant bits are used (b0 to b2). The possible value are from 0 to 7 (3 bits used set to 1).6.3.6 System menuThis menu is used to view or modify the system settings.------------------------------------------------------------------------NETWORK MANAGEMENT CARDSystem settings------------------------------------------------------------------------1 : UPS contact [Computer Room Manager]2 : UPS Location [Room Manager]3 : Item not available4 : History log interval (sec) [50]5 : Environment log interval (sec) [300]6 : Item not available7 : Language (AUTO,FRE,ENG,SPA, GER,ITA,CHI,CHT,JPN,KOR,CZI,RUS,POR) [AUTO]0 : Exit----------------------------------------------------------------------6.3.7 Shutdown menuThis menu is used to view or modify the shutdown settings for the 3 outlets.------------------------------------------------------------------------NETWORK MANAGEMENT CARDShutdown settings------------------------------------------------------------------------1 : Master2 : Outlet 23 : Outlet 30 : Exit------------------------------------------------------------------------