www.eaton.comNetworkManagement Card(Network-MS)User ManualNetwork Management Card – User Manual 34003991XT_EN/JC Page 65/143Connections with Intelligent Power Protector stay in standard mode (secure TCP)SSL Security Implementation:SSL version 3.0TLS version 1.0Method TLS_RSA_WITH_512_MD5Certificate 1024 bitsAuth RSAKey Exchange RSAEncryption RC4_512Digest MD5Changes take effect after a card reboot• Telnet access: This parameter enables the access to the setting parameters interface via a Telnet/SSHIconnection.• Telnet security: This parameter defines the protocol for the access to the setting parameters interface.These 2 values are mutually exclusive.• TELNET: The data are read or written via an unsecured access.• SSH: The data are read or written via a secured access.• Console interface: This parameter defines the way to access the setting parameters. The 2 values aremutually exclusive. The selected HMI (Human Machine Interface?) is available for the TCP/IPconnection (RS232 not concerned) and for the 2 protocols (Telnet, SSH). The new value will be takeninto account after a manual reset of the NMC.• MENU: The HMI is a menu interface and the parameters are accessible via some pre-defined menus.• CLI: The access to the parameters is done independently of each other using the command lineinterface.• Save: Saves any modifications.
