Eaton Network-MS User Manual

Also see for Network-MS: Quick start guide

Contents

www.eaton.comNetworkManagement Card(Network-MS)User ManualNetwork Management Card – User Manual 34003991XT_EN/JC Page 130/1438.2 SNMP objects8.2.1 IETF MIBThe Card implements the full IETF standard UPS MIB (RFC 1628), including the IETF alarm table and traps. Visithttp://tools.ietf.org for a description of the MIB. The UPS MIB access path is 1.3.6.1.2.1.338.2.2 EATON Pulsar MIB (ex MGE)This section contains an overview of MIB definitions for each of the MIB files:Eaton Pulsar MIB (MGE MIB)Eaton Pulsar MIB (MGE MIB) for environmental sensorsThe NMC implements the reduced Eaton Pulsar MIB (MGE MIB), only the objects listed in the following tables aremanaged. The entire MIB description is available at http://download.mgeops.comThe Eaton Pulsar MIB access path is 1.3.6.1.4.1.705.1.MIB object SNMP Format Add.pathupsmgIdentFamilyName String {1.1.0}upsmgIdentModelName String {1.2.0}upsmgIdentFirmwareVersion String {1.4.0}upsmgIdentSerialNumber String {1.7.0}upsmgConfigLowBatteryTime seconds {4.7.0}upsmgConfigLowBatteryLevel % {4.8.0}upsmgConfigAutoRestart 1(yes) 2(no) {4.9.0}upsmgConfigVARating VA {4.12.0}upsmgBatteryRemainingTime seconds {5.1.0}upsmgBatteryLevel % {5.2.0}upsmgBatteryVoltage deciVolts {5.5.0}upsmgBatteryCurrent deciAmps {5.6.0}upsmgBatteryFaultBattery 1(yes) 2(no) {5.9.0}upsmgBatteryReplacement 1(yes) 2(no) {5.11.0}upsmgBatteryLowBattery 1(yes) 2(no) {5.14.0}upsmgBatteryChargerFault 1(yes) 2(no) {5.15.0}upsmgBatteryLowCondition 1(yes) 2(no) {5.16.0}upsmgInputPhaseNum {6.1.0}mginputVoltage_1 DeciVolts {6.2.1.2.1.0}mginputVoltage_2 DeciVolts {6.2.1.2.2.0}mginputVoltage_3 DeciVolts {6.2.1.2.3.0}