www.eaton.comNetworkManagement Card(Network-MS)User ManualNetwork Management Card – User Manual 34003991XT_EN/JC Page 2/143Contents1 EATON NETWORK SOLUTION 61.1 GENERAL PRESENTATION 61.1.1 Connecting the UPS to the Ethernet network 71.1.2 Protection of the computers/servers 71.1.3 Supervision of the UPSs over the network 81.1.4 Connection 81.2 PRESENTATION OF THE NETWORK MANAGEMENT CARD (NMC) 101.2.1 Compatibility with UPSs 101.2.2 Direct sending of E-mail 111.2.3 Sending text messages (SMS) 111.2.4 Compatibility with the Network Management Systems (NMS) – Trap sending 111.2.5 Environment Sensor (option) 111.3 TECHNICAL DATA 121.3.1 Hardware characteristics 121.3.2 EMC Compatibility 121.3.3 Configuration 121.3.4 Administration 131.3.5 Network 131.3.6 Environment sensor 141.3.7 MIB (Management Information Base) 141.3.8 Default parameters 152 INSTALLATION 172.1 UNPACKING AND CHECK ON CONTENTS 172.2 INDICATIONS 172.3 INSTALLATION IN THE UPS 182.4 SENSOR INSTALLATION (OPTION) 193 CONFIGURATION 203.1 CONFIGURE IP PARAMETERS 203.1.1 Your network is equipped with a DHCPv4 server 213.1.2 Your network is not equipped with a DHCPv4 server 223.1.3 IPv6 Parameters 223.2 TEST AFTER CONFIGURATION 224 SUPERVISION AND ADMINISTRATION BY BROWSER 234.1 OPTIMISING THE PERFORMANCE OF YOUR BROWSER 234.2 UPS 244.2.1 UPS properties page 24
