www.eaton.comNetworkManagement Card(Network-MS)User ManualNetwork Management Card – User Manual 34003991XT_EN/JC Page 111/143Comments (1) : Writing enabled according to “AuthMethod” status(2) : Writing enabled according to “Enable” status6.4.7.5 ”getRadSecondSrv”Purpose To read an Radius secondary server settingSyntax syntax: getRadSecondSrv [options...]options:Server Enable <-- 0=No, 1=Yes -->Server ServerNameServer SharedSecretServer PortServer NasIdentiferTypeServer RetryServer TimeoutExamples #> getRadSecondSrvPortComments6.4.7.6 “setRadSecondSrv”Purpose To modify an Radius secondary server setting (1)Syntax syntax: setRadSecondSrv [options...]options:Server Enable <-- 0=No, 1=Yes -->(1)Server ServerName="Server Name"(1) (2)Server SharedSecret="Shared Secret"(1) (2)Server Port=xx <-- 1..65535 -->(1) (2)Server NasIdentiferType=IPV4|IPV6_1|IPV6_2|IPV6_LOCAL(1) (2)Server Retry=xx <-- 1..9999 -->(1) (2)Server Timeout=xx <-- 1..9999 -->(1) (2)Examples #> setRadSecondSrv Port =1812Comments (1) : Writing enabled according to “AuthMethod” status(2) : Writing enabled according to “Enable” status6.4.7.7 ”getLDAPPrimSrv”Purpose To read an LDAP primary server settingSyntax syntax: getLDAPPrimSrv [options...]options:Enable <-- 0=No, 1=Yes -->ServerNamePortExamples #> getLDAPPrimSrv Port
