7 Modbus RTU7.4 Operating mode Modbus RTU124 DE1 variable speed starter 09/14 MN040011EN www.eaton.comStatuswordActual speed (ID 7)The DE1 variable speed starter's actual speed will fall within a range of P-02(min. frequency) to P-01 (max. frequency). In the application, the value will bescaled by a factor of 0.1.Current (ID 8)The current is specified with one decimal place.Example: 34 ≙ 3.4 AStatus DIs (ID 11)This value indicates the digital inputs' state. The lowest bit indicates thestate of DI 1.Bit DescriptionValue = 0 value = 10 Drive not ready Ready for operation (READY)1 stop Running operation message (RUN)2 Clockwise rotating field (FWD) Anticlockwise rotating field (REV)3 no error Fault detected (FAULT)4 Acceleration ramp Frequency actual value equals reference value5 – Zero speed6 Speed control deactivated Speed control activated7 not used not used15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0MSB LSB
