GE AF-300 P11 User Manual

Contents

1-1Data subject to change without notice 7/07. © 2007 GE Drives1. Before Using This Product1.1 Receiving Instructions40 HP or moreLiftingHoles(4 holestotal)RatingsNameplateSurface CoverKeypad PanelMounting screws of surface coverKeypad PanelSurfacecoverIntermediate coverRatings nameplate30 HP or lessRatings NameplateUnpack and check the product as explained below.If you have any questions about the product, contact GEDrives or your local GE Drives distributor.1. Check the ratings nameplate to confirm that thedelivered product is the one that was ordered.2. Check for damaged and/or missing parts upon delivery.3. In addition to the drive unit and this manual, the package contains rubber bushings (for products with 30 Hp or less)and a terminating resistor (1/2 W, 120 ohm). The terminating resistors for products with 30 Hp or less are packagedseparately. The terminating resistors for products with 40HP or more are installed internal to the drive unit. Toconnect the internal terminating resistor, place hardware jumper J2 to the “ON” position. This terminating resistor isrequired for RS485 RTU communication.4. On drives rated 100 Hp and larger, a separately mounted DC Link Reactor is provided. The reactor should bechecked for proper rating before installation.1.2 AppearanceSER. No. : 9 9 1 0 - 0 0 0 1 2 M 0 0 01Production lot serial numberProduction week: Fiscal week (01 to 53)Production year: Last two digits of year (99 = 1999)Mounting screws ofsurface cover(Total of 6 screws)