GE AF-300 P11 User Manual

Contents

4-8 Data subject to change without notice 7/07. © 2007 GE Drives4.3.8 I/O CheckSelect 4. I/O on the Program Menu screen. Check to display analog and digital input/output signal status for the drive andoptions. Use and to switch between the seven screens of data.60.00 60.00 60.00RUNPRG > PRG MENUF/D > LED SHIFTFWD1.DATA SETTING2.DATA CHECK3. OPR MNTR> 4.I/O CHECKREM X2 X6FWD X3 X7REV X4 X8X1 X5 X9Signal OFF. Signal ONInput terminal status (terminals)60.00Signal OFF. Signal ON Signal OFF. Signal ONY1 Y5Y2Y3Y4Output terminal status 60.00COM X2 X6FWD X3 X7REV X4 X8X1 X5 X9Input terminal status(via communication)60.0012=±xx.xV22=±xx.xV32=±xx.xVV2=±xx.xVAnalog input signalTerminal 12 inputTerminal 22 input voltage (AIO option)Terminal 32 input voltage (AIO option)Terminal V2 input60.00C1=xx.xmAC2=xx.xmATerminal C1 input currentTerminal C2 input current (AIO option)Analog input signal60.00AO=xxxxVCS=xxxmADI=xxxxHDO=xxHAnalog output voltage (AIO option)Analog output current (AIO option)Digital input terminal (HEX indication)Digital ouput terminal (HEX indication)DIO option I/O status 60.00FMA=xx.xHFMP=xx.xVFMP=xxxxp/sOutput for meterFMA output voltageFMP output voltageFMP output frequencyPRGFUNCDATA60.00Master-side A/B phase 4x frequencyMaster-side Z phase 4x frequencySlave-side A/B phase 4x frequencySlave-side Z phase 4x frequencyPG/SY option input statusP1=±xxxx0p/sZ1=xxxp/sP2=±xxxxxOp/sZ2=xxxp/s