GE AF-300 P11 User Manual

Contents

4-1Data subject to change without notice 7/07. © 2007 GE DrivesThe keypad panel has various functions for specifying operations such as frequency setting, run/stop command, confirm-ing and changing function data, confirming status, and copying function code settings.Review the use of each function before attempting to operate the drive from the keypad panel.The keypad panel can also be removed or inserted during inverter operation. However, if the keypad panel is removedduring keypad panel operation (e.g., run/stop, frequency setting), the drive stops and outputs an alarm.Control keys(valid during keypad panel operation):Used for drive run and stopFWD Forward operation commandREV Reverse operationSTOP Stop commandOperation keys:Used for switching screens, datachange,frequency setting, etc.4.1 Appearance of Keypad PanelOperation Keys Primary FunctionPRG Used to switch the current screen to the menu screen or switch to the initial screen in operation / trip mode.FUNCDATA Used to switch the LED monitor or to determine the entered frequency, function code, or dataUsed to change data, move the cursor up or down, or scroll the screenSHIFT Used to move the cursor horizontally at data change. When this key is pressed with the up or down key, the cursor moves tothe next function block.RESET Used to cancel current input data and switch the displayed screen. If an alarm occurs, this key is used to reset the trip status(valid only when the initial alarm mode screen is displayed)STOP + Used to switch normal operation mode to jogging operation mode or vice versa. The selected mode is displayed on the LCDmonitor.STOP + RESET Switches operation mode (from keypad panel operation mode to terminal block operation mode or reverse). When these keysare operated, function F02 data is switched from 0 to 3 or from 1-4 to 0. The selected mode is displayed on the LCDindicator.4. Keypad PanelLED monitor4-digit display. Used to display data such as setting frequency, outputfrequency and alarm code.Auxiliary Information Related to LED MonitorIndicates selected units or multiple of the data shown on the LED monitorand is displayed on the top line of the LCD monitor. The ■ symbolindicates selected units or multiple number. The symbol indicates thatthere is an upper screen not currently displayed.LCD Monitor:Used to display various items of information such as operation status andfunction data. An operating guide message, is scrolled and displayed atthe bottom of the LCD monitor. This LCD monitor has a backlight featurewhich turns on when the control power is applied or any keypad key ispressed, and stays on approximately 5 minutes after the last key stroke.Status Indicators on LCD Monitor:Displays current operating status:FWD: Forward operationREV: Reverse operationSTOP: StopDisplays the selected operating mode:REM: terminal blockLOC: keypad panelCOMM: communication terminalJOG: jogging modeThe symbol indicates that there is a lower screen not currently displayed.RUN LED (valid during operation from keypad panel):Indicates that an operation command was input by pressing the FWD orREV key.